SciELO - Scientific Electronic Library Online

 
vol.29 número2A new seismic response control technique for buildings using block and tackle índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Tecnia

versión impresa ISSN 0375-7765versión On-line ISSN 2309-0413

Resumen

DIAZ, Miguel; ZAVALA, Carlos; FLORES, Erika  y  CARDENAS, Lourdes. Development of analytical models for confined masonry walls based on experimental results in Lima city. Tecnia [online]. 2019, vol.29, n.2, pp.23-29. ISSN 0375-7765.  http://dx.doi.org/10.21754/tecnia.v29i2.711.

For 30 years the Structural Laboratory of the Peru Japan Center for Earthquake Engineering Research and Disaster Mitigation (CISMID) from the Faculty of Civil Engineering (FIC) of the National University of Engineering (UNI) is been testing different types of structural system, mainly confined masonry walls. In that sense, large number of experiments have been conducted in confined masonry walls. Analytical model for capacity curve is presented for walls with different types of masonry units, such as industrial hollow bricks, solid handmade bricks and tubular bricks which are the most representative units in Metropolitan Lima and Callao. Tetra-linear models are calibrated with experimental results in order to provided generalized model in terms of sensitive parameters which determines the capacity curve for flexural shear failure mechanism, such as longitudinal and transversal steel ratio, slenderness ratio and axial load ratio where shear stress is observed in the cracking, yielding, maximum and ultimate points.

Palabras clave : masonry walls; capacity curve; shear stress; deformation limits.

        · texto en Inglés     · Inglés ( pdf )